抽水蓄能电站压力钢管焊缝应力测试与评价分析

doi:10.16232/j.cnki.1001-4179.2017.17.019

摘要/Abstract

摘要： 为确保抽水蓄能电站机组通流部件的稳定运行，对球阀与压力钢管连接位置处焊缝应力进行了测试，利用球阀全开导叶全关时的静水压力对应力测点进行标定，进而获得了甩负荷情况下焊缝位置处的应力变化特征。数据分析结果表明：焊缝处各测点环向应力与球阀前压力呈正相关，相关系数大于0.94；焊缝处顺水流方向应力与压力呈负相关，相关系数小于-0.85；稳态发电工况及甩负荷过程中应力测点中存在明显的动静干涉频率成分；受水锤影响，最大应力变化产生于甩满负荷工况；最大应力值分析表明，压力钢管可以长期安全稳态的运行。

关键词: 压力钢管, 应力分析, 动静干涉, 叶片过流频率, 抽水蓄能电站

Abstract: In order to ensure the safe operation of water passage component of hydropower units in pumped-storage power station, stress measurement of welding seams at connection position of ball valve and penstock was performed. Stress measuring points was calibrated by hydrostatic pressure in fully opening of guide vanes and fully closing of ball value. Then the stress characteristics of welding seam area were obtained in the case of load shedding. The data analysis indicate that circumferential stress has positive correlation with water pressure by correlation coefficient larger than 0.94 and flow-direction stress has negative correlation with water pressure by correlation coefficient less than -0.85; rotor-stator reaction frequency exists in stable generating condition and load rejection process; under the influence of water hammer, the maximum stress deviation happens in load rejection process; the maximum stress analysis shows that the penstock can run safely in long term.

Key words: penstock, stress analysis, rotor-stator reaction, blade flow passing frequency, pumped-storage power station

张飞，朱晨，徐静，秦俊. 抽水蓄能电站压力钢管焊缝应力测试与评价分析[J]. 人民长江, doi: 10.16232/j.cnki.1001-4179.2017.17.019.

ZHANG Fei, ZHU Chen, XU Jing, QIN Jun. Welding seam stress measurement and evaluation of penstock in a pumped-storage power station[J]. , doi: 10.16232/j.cnki.1001-4179.2017.17.019.

[1]	张鹏王俊星段东晓周耘辛. 常规抽水蓄能电站电气主接线形式选择[J]. 人民长江, 2023, 54(S1): 82-85.
[2]	马雨峰;何军;王兰普;孔张宇;吕风英. 大型地下厂房岩壁吊车梁锚杆应力突变机理分析[J]. 人民长江, 2022, 53(S2): 129-134.
[3]	唐翔;陈华军;郁光;舒君侠. 大型水轮发电机组压力钢管排水方式对比分析与应用[J]. 人民长江, 2022, 53(S2): 152-154.
[4]	胡富杭;李任杰;石豫川;赖亚光;闫天. 宁国抽水蓄能电站凝灰岩倒转破碎成因机制研究[J]. 人民长江, 2022, 53(6): 134-140.
[5]	汪碧飞;李月伟;孔剑;胡剑杰. 卡洛特水电站埋藏式压力钢管联合受力研究[J]. 人民长江, 2022, 53(2): 138-142.
[6]	雷显阳，王樱畯，孙檀坚，柏正林. 句容抽水蓄能电站堆石坝岩溶基础处理措施研究[J]. 人民长江, 2021, 52(S2): 74-78.
[7]	刘琪. 垣曲抽水蓄能电站排水洞开挖施工技术[J]. 人民长江, 2021, 52(S2): 182-184.
[8]	覃柏钧. 深圳抽水蓄能电站上下库公路隧道长管棚施工技术[J]. 人民长江, 2021, 52(S2): 188-191.
[9]	方国材，杨剑峰，阚阚，段慧玲，郭绘娟，郑源. 大型竖井贯流泵多工况水力稳定性及其动应力分析[J]. 人民长江, 2021, 52(S1): 317-321.
[10]	张恩宝，孔张宇，王兰普，张顺利，吕风英. 丰宁抽水蓄能电站地下厂房围岩稳定性分析[J]. 人民长江, 2021, 52(8): 151-157.
[11]	泰荣，苏春循，夏自平，周大庆，阚阚，陈会向. 抽蓄机组“背靠背”起动过程电气暂态特性研究[J]. 人民长江, 2021, 52(6): 172-178.
[12]	章梦捷，吴都，李高会，姚敏，杰和扁. 洪屏抽水蓄能电站现场甩负荷试验及数值反演分析[J]. 人民长江, 2021, 52(6): 183-187.
[13]	张飞, 王涛, 刘殿海, 赵志文. 抽蓄电站一管两机负荷扰动时被扰机组特性研究[J]. 人民长江, 2021, 52(2): 187-191.
[14]	胡富杭,熊朝正,石豫川, 吉锋. 基于可拓灰色模型的台风暴雨型泥石流易发性评价[J]. 人民长江, 2021, 52(10): 26-32.
[15]	费万堂，张练，马雨峰，刘双华，王兰普，秦洋. 丰宁抽水蓄能电站地下厂房初始地应力场反演[J]. 人民长江, 2020, 51(增刊I): 112-116.

抽水蓄能电站压力钢管焊缝应力测试与评价分析

Welding seam stress measurement and evaluation of penstock in a pumped-storage power station

PDF

可视化

摘要/Abstract

引用本文

使用本文

参考文献

相关文章 15

编辑推荐

Metrics

本文评价